Approximately 10.9 cu.F.t (0.31 m³)

59.1" L x 28.7" W x 62.6" H 

1500mm (L) x 730mm (W) x 1590mm (H) 

• 230 VAC/50-60 Hz, 10 A    

• 115 VAC/50-60 Hz, 20 A   

• 100 VAC/50-60 Hz, 20 A

Stainless Steel Type 304 (USA), 5.0 mm in thicknes

Internal Dimensions

31.5" L x 23.6" W x 25.6" H 

800mm (L) x 600mm (W) x 650mm (H)

Acrylic, 15.0 mm in thickness,Lexan (polycarbonate) 15 mm in thickness upon request

Dimensions

30.3"Lx15.0" W

770mm (L) x 380mm (W)

Material

Thickness

0.4 mm,(standard)

0.8 mmupon request

• Inlet and outlet filters eliminate particles with the size > 0.3μm

• Fluorescent lamp, front mounted

Typically

· by oxygen leak decay test method according to ISO 10648-2: 1994,

· by Pressure Change Test Method according to ISO 25412

• Automated removal of H₂O and O₂

• Single column, automated column regeneration; dual purification columns (optional)

• Enclosed stainless steel loop for gas recirculation and purification

Column regeneration gas

Description

Rotary vane pump, installed with oil mist filter, oil circulator, and automatic gas ballast control; dual-stage.

Or dry pump upon request

Pumping rate

7.0 CFM (12 m³/h)

Ultimate vacuum 

-3 mbar

Material

Integrated blower, oil-free, highly efficient

Flow Rate

47 CFM (80 m³/h)

• Leak rate -5 mbar l/s

• Electro-pneumatic DN 40

Typically

· by oxygen leak decay test method according to ISO 10648-2: 1994,

· or by Pressure Change Test Method according to ISO 25412

Material

Stainless Steel Type 304; 6.0 mm in thickness

Internal  Dimensions

15.7" L x 9.8" W x 9.8" H 

400mm (L) x 250mm (W) x 250mm (H)

Vacuum

1 x 10-2 mbar

By setting up the purging time and pressure, the system automatically purges the chamber                      
O2 level, timer or manually controlled

8" L x 3" D x 2.4" H 

205mm (L) x 80mm (D) x 60mm (H)

0 to 1000 ppm (V)

Other Analyzer

GE oxy.IQ™ Oxygen Transmitter upon request

Dimensions 

8" L x 3" D x 2.4" H 

205mm (L) x 80mm (D) x 60mm (H)

Measurement Range

0 to 500 ppm (V)

Other Analyzer

GE VeriDri™ Dew-Point Transmitter

Column Material

Stainless Steel Type 304 (USA); 3.0 mm in thickness

Inside Dimensions

8.6"(Φ) x 17.7"(H)

220mm (Φ) x 450mm (H)

Packing Material

High-quality activated carbon

Stainless Steel Type 304

4 or 8 pins, Stainless Steel Type 304

Integrated on the side panel of the glovebox

16.6" H x 10.5" W x 6.4" D 

423mm (H) x 266mm (W) x 162.5mm (D)

18 L or 32 L, 5 shelves with adjustable height

Minimum Temperature

-35 ℃                (-31℉)

• 10x, 20x, and 40x targets, 5.0 M CCD

Capacity

Minimum Temperature

More efficient to remove oxygen and moisture

Regenerable, more efficient to purify organic solvent

Accelerate the gas flow in the glovebox chamber

Installed in Main Antechamber; Maximum 200 ℃; Temperature control ±1℃.

UL certified, ISO9001 certified, and CE certified

• One year limited warranty with lifetime support

• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

• Gloves are consumable items and are NOT covered by warranty

• The Oxygen Sensor is a consumable component NOT covered by warranty. Please follow the videos below for proper operations

         1) Replacing a worn unit

         2) Storing the sensor to ensure maximum longevity when not in use

• The interconnections between the glove-box chamber and the gas purification system must be unimpeded during the purification cycles

• The use of corrosive gases is prohibited because they will damage the water and oxygen sensors

• Regularly perform regeneration to maintain the optimum purification efficiency

• The O₂ removing rate is largely dependent on the type of purging gas used. For faster chamber purging process, Nitrogen is preferred over Argon due to its lighter mass

• Corrosive liquid (such as LiPF₆ electrolyte) must be sealed in a container inside the glove box. Otherwise, liquid vapour may condense and corrode the steel chamber and purification pipeline